NBR-plus
Intumescent fireproof wrap made of flexible glass filament fabric composite building material for non-combustible pipes and lines with combustible insulation components. The wrap has an intumescent fire protection coating on one side and is pre-slit lengthwise in the middle for easy separation.
Use: NBR-plus fireproof wrap is suitable for sealing non-combustible pipelines with combustible insulation.
Areas of application
NBR-plus fireproof wrap is suitable for indoor and outdoor use in the area of structural fire protection to seal the following pipes and pipelines:
- Non-combustible pipes with all customary types of combustible insulation (FEF insulation)
- Copper pipelines up to an outer diameter of 88.9 mm
- Steel/cast iron/stainless steel pipelines up to an outer diameter of 323.9 mm
- HVAC split line combinations
Highlights
- Intumescent inner fire protection coating
- Fireproof wrap pre-slit in the middle and separable lengthwise
- By separating the wrap, less material is required in the wall
- Only one wrap is required on the underside of floors
- New: now also tested for sealing in timber construction
Used for system
Features
- High resistance to external influences such as moisture, weathering, and UV radiation (use category X)
- Surface can be coated over
- External glass fabric (grey coating) and inner coating that foams up in case of fire (red coating)
Downloads
Technical data sheets / Safety data sheets / Declaration of performance
Product information
Technical data
General
Brand name
FLAMRO
Area of application
Fire protection wrap for sealing services with combustible elements (e.g. pipes with combustible insulations)., For indoor and outdoor use
Colour
Grey
Short description of the article
Flexible glass filament fabric composite building material with an intumescent inner coating on one side. Pre-slotted in the centre for easy lengthwise separation.
Storage
Store in dry indoor areas. Protect from pressure loads.
Delivery form
Roll, pre-slotted (2 x 62.5 mm)
Product name
Fire protection wrap
Execution
Fabric coated with intumescent material on the inside.
Processing instructions
Apply with standard cutting tools such as scissors or cutter knife. Can be coated over with approved paints based on acrylic dispersion, alkyd resin, polyurethane acrylic and epoxy resin in acc. with EOTA TR 024.
Processing temperature
Interactions
No effect on other building materials such as polyethylene (PE) and polyvinyl chloride (PVC) in acc. with EOTA TR 024.
Reaction temperature
Temperature [°C]
150 °C
Comparison symbols
≥
Delivery and packaging
General
Label size (L x W)
130.0x130.0
Content
10 m
Product note
pre-slotted 2 x 62.5 mm x 10 m
Delivery form
Roll, pre-slotted (2 x 62.5 mm)
NBR-plus - NBR-plus fire protection fabric, roll, 10 metres, width 125 mm, pre-slotted (2 x 62.5 mm)
Article number
01261941
Color
Grey
NBR-plus - Fire protection wrap
Article number
0760150133
Color
Grey
