System Flammotect Easy Seal
Easy-to-use firestop penetration sealing system made of mineral wool and ablative filler for small openings due to pipe or cable penetrations. Fire-resistant up to 120 minutes.
Areas of application
Permanent fire sealing of electrical cables and lines of all types and diameters in:
- Plasterboard walls
- Solid walls
- Solid floors
Highlights
- Very quick way to create an approved penetration sealing system for small openings
- Low and cost-effective material usage: the use of filler and mineral wool is sufficient for the majority of applications
- Ideal for small penetration seals as well as difficult-to-access or irregular openings
- Also suitable for HVAC split line combinations and solar pipes
Fire resistance class
Max. EI 120 acc. to EN 13501-2
Certificate
ETA-22/0052: 6/24/24
Features
- Variety of certificates for products used, e.g. resistance to moisture, freeze-thaw cycles, and UV radiation as well as various oils and chemicals
- The required dry film thicknesses can be applied in a single operation
- The consistency of the coating material enables the clean coating of cables and seal surfaces
- The coating remains flexible even after complete curing
- The fire protection coating can be coated over with other paints
Downloads
Application data sheets / Installation manuals / Certificates
System information
Technical data
General
Brand name
FLAMRO Brandschutz Vertriebs GmbH
Thickness of building element
Building element
Plasterboard wall
Thickness of building element
≥ 100 mm
Building element
Solid wall
Thickness of building element
≥ 100 mm
Building element
Solid floor
Thickness of building element
≥ 150 mm
Maximum penetration seal size - floor (L x W)
Building element
Solid floor
Width
150 mm
Length
350 mm
Maximum penetration seal size - wall (W x H)
Building element
Plasterboard wall
Width
500 mm
Height
200 mm
Building element
Solid wall
Width
500 mm
Height
200 mm
Penetration seal thickness
Building element
Plasterboard wall
Strength
≥ 100 mm
Building element
Solid wall
Strength
≥ 100 mm
Building element
Solid floor
Strength
≥ 150 mm
Data line
Double solar pipes
Diameter DN
DN 40
Electrical installation conduits, bundled Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 32 mm
Cable Ø
≤ 21 mm
Electrical installation conduits, single Ø
Single Ø
≤ 32 mm
Cable Ø
≤ 21 mm
Coaxial cables / wave guides Ø
Diameter Ø
≤ 51.1 mm
Cable bundles Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 21 mm
Cable Ø
Diameter Ø
≤ 21 mm
General
HVAC split line combinations
yes
Non-combustible pipes Ø
Diameter Ø
≤ 88.9 mm
Insulation
Mineral fibre
Material/manufacturer
Copper
Diameter Ø
≤ 219.1 mm
Insulation
Mineral fibre
Material/manufacturer
Steel
Diameter Ø
≤ 88.9 mm
Insulation
FEF
Material/manufacturer
Copper
Diameter Ø
≤ 219.1 mm
Insulation
FEF
Material/manufacturer
Steel
Required products
FLAMMOTECT-A - Coating, 12.5 kg
Article number
01155131
FLAMMOTECT-A - Coating, 5 kg
Article number
01155132
FLAMMOTECT-A - Solid emulsion 12.5 kg
Article number
01155136
FLAMMOTECT-A - Solid emulsion, 5kg
Article number
01155121
FLAMMOTECT-A - Filler, 12.5 kg
Article number
01155134
FLAMMOTECT-A - Filler, 5 kg
Article number
01155135
FLAMMOTECT-A - Filler, 310 ml
Article number
01155115
FLAMMOTECT-A -
Article number
01155153
NBR-plus - NBR-plus fire protection fabric, roll, 10 metres, width 125 mm, pre-slotted (2 x 62.5 mm)
Article number
01261941
NBR-plus -
Article number
0760150133
Mineral wool - 10 kg bag
Article number
01183000
Lamella mat KLIMAROCK - Roll 610 x 50 cm = 3.05 m²
Article number
01187100
Identification Label, Europe -
Article number
14003
