System Flammotect 1 x 60 mm - Image
Mixed penetration sealing systems

System Flammotect 1 x 60 mm

Mixed penetration seal made of a layer of mineral fibre boards (1 x 60 mm) with ablative fire protection coating for pipes, cables, and cable bundles. In case of fire, the system remains fire-resistant for 90 minutes.

Areas of application

Sealing of lines, cable penetrations, and pipes in:

  • Plasterboard walls
  • Solid walls
  • Solid floors
  • Timber construction (CLT walls and CLT floors)
  • Sandwich panel walls

Highlights

  • Minimal dry film thickness on seal surfaces as well as on installed cables, cable bundles, and cable trays
  • Only short lengthwise coating of lines is necessary
  • Easy sealing of standard and non-standard combustible pipelines in the mixed penetration seal with wrap or collar
  • Sealing of non-combustible pipes with PIR insulation
  • Approved as a fire protection solution in timber construction

Fire resistance class

EI 30 to EI 60 (max. EI 90) acc. to EN 13501-2

Certificate

ETA-22/0052: Mar 25, 2025

Features

  • Variety of certificates for products used, e.g. resistance to moisture, freeze-thaw cycles, and UV radiation as well as various oils and chemicals
  • The required dry film thicknesses can be applied in a single operation
  • The consistency of the coating material enables the clean coating of cables and seal surfaces
  • The coating remains flexible even after complete curing
  • The fire protection coating can be coated over with other paints

Installation video: System Flammotect

The Flammotect system consists of a 60 mm or 80 mm thick mineral fibre board (single layer) or two 50 mm or two 60 mm thick boards (double layer) and is equipped with an ablative fire protection coating. It offers a wide range of applications for a wide variety of media lines with a broad spectrum of diameters and insulation types. The Flammotect system fulfils the requirements of fire resistance class up to EI 120 in accordance with EN 13501-2.

System Flammotect 1 x 60 mm

System information

Technical data

General

Brand name

Flamro Brandschutz-Systeme GmbH, Am Sportplatz 2, 56291 Leiningen

Thickness of building element

Building element

Flexible wall

Thickness of building element

≥ 100 mm


Building element

Rigid wall

Thickness of building element

≥ 100 mm


Building element

Rigid floor

Thickness of building element

≥ 150 mm


Building element

CLT wall

Thickness of building element

≥ 100 mm


Building element

CLT floor

Thickness of building element

≥ 140 mm


Building element

Sandwich panel wall

Thickness of building element

≥ 100 mm

Maximum penetration seal size - floor (L x W)

Building element

Rigid floor

Width

1400 mm

Length

1200 mm


Building element

CLT floor

Width

1000 mm

Length

600 mm

Maximum penetration seal size - wall (W x H)

Building element

Flexible wall

Width

2000 mm

Height

1224 mm


Building element

Rigid wall

Width

2000 mm

Height

1224 mm


Building element

Rigid floor

Width

10000 mm

Height

1000 mm


Building element

CLT wall

Width

600 mm

Height

1000 mm


Building element

CLT floor

Width

600 mm

Height

1000 mm


Building element

Sandwich panel wall

Width

1000 mm

Height

1000 mm

Penetration seal thickness

Building element

Sandwich panel wall

Penetration seal thickness

≥ 60 mm

Data line

Combustible pipe Ø

Diameter Ø

≤ 160 mm

Material/manufacturer

PVC-U, PVC-C, PE-HD, ABS, SAN + PVC, PP-H

Double solar pipes

Diameter DN

DN 40

Material/manufacturer

NanoSun²

Preassembled electrical conduits Ø

Bundle Ø

≤ 100 mm

Single Ø

≤ 32 mm

Cable Ø

≤ 21 mm

Single electrical conduit Ø

Single Ø

≤ 32 mm

Cable Ø

≤ 21 mm

Coaxial cables / waveguides Ø

Diameter Ø

≤ 51.1 mm

Material/manufacturer

CommScope HELIAX®


Diameter Ø

≤ 50.3 mm

Material/manufacturer

RFS CELLFLEX®


Diameter Ø

≤ 48.2 mm

Material/manufacturer

RFS RADIAFLEX®

Cable bundles Ø

Bundle Ø

≤ 100 mm

Single Ø

≤ 21 mm

Cable Ø

Diameter Ø

≤ 80 mm

General

Cable support system

yes

Split HVAC line combinations

yes

Multilayer pipe Ø

Diameter Ø

≤ 63 mm

Insulation

FEF (flexible elastomeric foam)

Material/manufacturer

Henco


Diameter Ø

≤ 75 mm

Insulation

Mineral fibre (general mineral insulation)

Material/manufacturer

Geberit Mepla


Diameter Ø

≤ 75 mm

Insulation

Mineral fibre (general mineral insulation)

Material/manufacturer

KE KELIT KELOX KM 110


Diameter Ø

≤ 110 mm

Insulation

FEF (flexible elastomeric foam)

Material/manufacturer

Uponor MLC Pipe white S

Non-combustible pipes Ø

Diameter Ø

≤ 219.1 mm

Insulation

FEF (flexible elastomeric foam)

Material/manufacturer

Steel, stainless steel, cast iron


Diameter Ø

≤ 88.9 mm

Insulation

FEF (flexible elastomeric foam)

Material/manufacturer

Copper

speedpipes

Diameter Ø

≤ 40 mm

Required products

FLAMMOTECT-A - Coating, 12.5 kg

Article number

01155131

FLAMMOTECT-A - Coating, 5 kg

Article number

01155132

FLAMMOTECT-A - Solid emulsion 12.5 kg

Article number

01155136

FLAMMOTECT-A - Solid emulsion, 5kg

Article number

01155121

FLAMMOTECT-A - Filler, 12.5 kg

Article number

01155134

FLAMMOTECT-A - Filler, 5 kg

Article number

01155135

FLAMMOTECT-A - Filler, 310 ml

Article number

01155115

FLAMMOTECT-A - 20 x 600 ml 

Article number

01155153

FLAMMOTECT-A - 60/0.5/2 - 1000 x 600 x 60 mm, coating 0.5 mm pre-coated on both sides

Article number

01182165

NBR-plus - 10 m - NBR-plus fire protection fabric, roll, 10 metres, width 125 mm, pre-slotted (2 x 62.5 mm)

Article number

01261941

NBR-plus - 5 m -

Article number

0760150133

AWM II - for pipe-Ø 32 mm, grey

Article number

01142032

AWM II - for pipe-Ø 40 mm, grey

Article number

01142040

AWM II - for pipe-Ø 50 mm, grey

Article number

01142050

AWM II - for pipe-Ø 63 mm, grey

Article number

01142063

AWM II - for pipe-Ø 75 mm, grey

Article number

01142075

AWM II - for pipe-Ø 90 mm, grey

Article number

01142090

AWM II - for pipe-Ø 110 mm, grey

Article number

01142110

AWM II - for pipe-Ø 125 mm, grey

Article number

01142125

AWM II - for pipe-Ø 140 mm, grey

Article number

01142140

AWM II - for pipe-Ø 160 mm, grey

Article number

01142160

KSL-W - 10 000 x 50 x 1.5 mm, self-adhesive

Article number

15510

KSL-W - 20 000 x 50 x 1.5 mm, self-adhesive

Article number

15520

Lamella mat KLIMAROCK - Roll 610 x 50 cm = 3.05 m²

Article number

01187100

Mineral wool - 10 kg bag

Article number

01183000

Identification Label, Europe -

Article number

14003

Do you have questions on System Flammotect 1 x 60 mm and other fire protection applications? Please contact us:

Telephone receiver as telephone icon to call Flamro's hotline.

+49 4105 4090-0

Envelope as e-mail icon to go to the contact form.

Get in touch

How can we help?