System Flammotect 2 x 60 mm
Mixed penetration sealing systems made of two mineral fibre boards (2 x 60 mm) with ablative fire protection coating on both sides for cables and pipes of all types. In case of fire, the system remains fire-resistant for 120 minutes.
Areas of application
Mixed penetration seal for various cables and pipelines in:
- Plasterboard walls
- Solid walls
- Solid floors
- Timber construction (CLT walls and CLT floors)
- Sandwich panel walls
Highlights
- Can be installed without cladding of the aperture edge
- Easy sealing of standard and non-standard combustible pipelines in the mixed penetration seal with wrap or collar
- Fire protection collar attached using coarse thread screws
- Approved as a fire protection solution in timber construction
Fire resistance class
EI 90 to EI 120 acc. to EN 13501-2
Certificate
ETA-22/0052: 12/10/24
Features
- Variety of certificates for products used, e.g. resistance to moisture, freeze-thaw cycles, and UV radiation as well as various oils and chemicals
- The required dry film thicknesses can be applied in a single operation
- The consistency of the coating material enables the clean coating of cables and seal surfaces
- The coating remains flexible even after complete curing
- The fire protection coating can be coated over with other paints
Downloads
Application data sheets / Installation manuals / Certificates
Installation video: System Flammotect
The Flammotect system consists of a 60 mm or 80 mm thick mineral fibre board (single layer) or two 50 mm or two 60 mm thick boards (double layer) and is equipped with an ablative fire protection coating. It offers a wide range of applications for a wide variety of media lines with a broad spectrum of diameters and insulation types. The Flammotect system fulfils the requirements of fire resistance class up to EI 120 in accordance with EN 13501-2.
System information
Technical data
General
Brand Name
FLAMRO Brandschutz Vertriebs GmbH
Thickness of building element
Component
Plasterboard wall
Thickness of building element
≥ 100 mm
Component
Solid wall
Thickness of building element
≥ 100 mm
Component
Solid floor
Thickness of building element
≥ 150 mm
Component
Timber wall
Thickness of building element
≥ 100 mm
Component
Timber floor
Thickness of building element
≥ 140 mm
Component
Sandwich panel wall
Thickness of building element
≥ 120 mm
Maximum penetration seal size - floor (L x W)
Component
Solid floor
Width
2000 mm
Length
1400 mm
Component
Timber floor
Width
1000 mm
Length
600 mm
Maximum penetration seal size - wall (W x H)
Component
Plasterboard wall
Width
1400 mm
Height
2000 mm
Component
Solid wall
Width
1400 mm
Height
2000 mm
Component
Timber wall
Width
600 mm
Height
1000 mm
Component
Sandwich panel wall
Width
1000 mm
Height
1000 mm
Penetration seal thickness
Component
Plasterboard wall
Thickness
≥ 120 mm
Component
Solid wall
Thickness
≥ 120 mm
Component
Solid floor
Thickness
≥ 150 mm
Component
Timber wall
Thickness
≥ 120 mm
Component
Timber floor
Thickness
≥ 150 mm
Component
Sandwich panel wall
Thickness
≥ 120 mm
Data line
Combustible pipe Ø
Diameter Ø
≤ 160 mm
Double solar pipes
Diameter DN
DN 40
Electrical installation conduits, bundled Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 32 mm
Cable Ø
≤ 21 mm
Electrical installation conduits, single Ø
Single Ø
≤ 63 mm
Cable Ø
≤ 21 mm
Coaxial cables / wave guides Ø
Diameter Ø
≤ 51.1 mm
Cable bundles Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 21 mm
Cable Ø
Diameter Ø
≤ 80 mm
General
Cable support system
yes
HVAC split line combinations
yes
Multilayer pipe
Diameter Ø
≤ 75 mm
Insulation
FEF
Diameter Ø
≤ 32 mm
Insulation
PEF
Diameter Ø
≤ 75 mm
Insulation
Mineral fibre
Non-combustible pipes Ø
Diameter Ø
≤ 108 mm
Insulation
FEF
Material / Manufacturer
Copper
Diameter Ø
≤ 219.1 mm
Insulation
FEF
Material / Manufacturer
Steel
Diameter Ø
≤ 108 mm
Insulation
Mineral fibre
Material / Manufacturer
Copper
Diameter Ø
≤ 323.9 mm
Insulation
Mineral fibre
Material / Manufacturer
Steel
Diameter Ø
≤ 88.9 mm
Insulation
PIR
Material / Manufacturer
Copper
Diameter Ø
≤ 219.1 mm
Insulation
PIR
Material / Manufacturer
Steel
speedpipes
Diameter Ø
≤ 50 mm
Required products
FLAMMOTECT-A - Coating, 12.5 kg
Article number
01155131
FLAMMOTECT-A - Coating, 5 kg
Article number
01155132
FLAMMOTECT-A - Solid emulsion 12.5 kg
Article number
01155136
FLAMMOTECT-A - Solid emulsion, 5kg
Article number
01155121
FLAMMOTECT-A - Filler, 12.5 kg
Article number
01155134
FLAMMOTECT-A - Filler, 5 kg
Article number
01155135
FLAMMOTECT-A - Filler, 310 ml
Article number
01155115
FLAMMOTECT-A -
Article number
01155153
Mineral fibre board FLAMMOTECT-A - 60/0.5/1 - 1000 x 600 x 60 mm, coating 0.5 mm single-sided pre-coated
Article number
01181165
NBR-plus - NBR-plus fire protection fabric, roll, 10 metres, width 125 mm, pre-slotted (2 x 62.5 mm)
Article number
01261941
NBR-plus -
Article number
0760150133
AWM II - for pipe-Ø 32 mm, grey
Article number
01142032
AWM II - for pipe-Ø 40 mm, grey
Article number
01142040
AWM II - for pipe-Ø 50 mm, grey
Article number
01142050
AWM II - for pipe-Ø 63 mm, grey
Article number
01142063
AWM II - for pipe-Ø 75 mm, grey
Article number
01142075
AWM II - for pipe-Ø 90 mm, grey
Article number
01142090
AWM II - for pipe-Ø 110 mm, grey
Article number
01142110
AWM II - for pipe-Ø 125 mm, grey
Article number
01142125
AWM II - for pipe-Ø 140 mm, grey
Article number
01142140
AWM II - for pipe-Ø 160 mm, grey
Article number
01142160
KSL-W - 10 000 x 50 x 1.5 mm, self-adhesive
Article number
15510
KSL-W - 20 000 x 50 x 1.5 mm, self-adhesive
Article number
15520
EC Endless Collar (U/U) - Set (U/U) - consisting of fire protection wrap, metal tape, hooks, labels
Article number
01145303
Mineral wool - 10 kg bag
Article number
01183000
Lamella mat KLIMAROCK - Roll 610 x 50 cm = 3.05 m²
Article number
01187100
Identification Label, Europe -
Article number
14003
