System Flammotect 2 x 60 mm mineral fibre board sealing system installed around various pipelines and cables in a wall profile.
Mixed penetration seal

System Flammotect 2 x 60 mm

Mixed penetration sealing systems made of two mineral fibre boards (2 x 60 mm) with ablative fire protection coating on both sides for cables and pipes of all types. In case of fire, the system remains fire-resistant for 120 minutes.

Areas of application

Mixed penetration seal for various cables and pipelines in:

  • Plasterboard walls
  • Solid walls
  • Solid floors
  • Timber construction (CLT walls and CLT floors)
  • Sandwich panel walls

Highlights

  • Can be installed without cladding of the aperture edge
  • Easy sealing of standard and non-standard combustible pipelines in the mixed penetration seal with wrap or collar
  • Fire protection collar attached using coarse thread screws
  • Approved as a fire protection solution in timber construction

Fire resistance class

EI 90 to EI 120 acc. to EN 13501-2

Certificate

ETA-22/0052: 1/12/24

Features

  • Variety of certificates for products used, e.g. resistance to moisture, freeze-thaw cycles, and UV radiation as well as various oils and chemicals
  • The required dry film thicknesses can be applied in a single operation
  • The consistency of the coating material enables the clean coating of cables and seal surfaces
  • The coating remains flexible even after complete curing
  • The fire protection coating can be coated over with other paints

Installation video: System Flammotect

The Flammotect system consists of a 60 mm or 80 mm thick mineral fibre board (single layer) or two 50 mm or two 60 mm thick boards (double layer) and is equipped with an ablative fire protection coating. It offers a wide range of applications for a wide variety of media lines with a broad spectrum of diameters and insulation types. The Flammotect system fulfils the requirements of fire resistance class up to EI 120 in accordance with EN 13501-2.

System Flammotect 2 x 60 mm

System information

Technical data

Thickness of building element

Building element

Plasterboard wall

Thickness of building element

≥ 100 mm


Building element

Solid wall

Thickness of building element

≥ 100 mm


Building element

Solid floor

Thickness of building element

≥ 150 mm


Building element

Timber wall

Thickness of building element

≥ 100 mm


Building element

Timber floor

Thickness of building element

≥ 140 mm


Building element

Sandwich panel wall

Thickness of building element

≥ 120 mm

Maximum penetration seal size - floor (L x W)

Building element

Solid floor

Width

2000 mm

Length

1400 mm


Building element

Timber floor

Width

1000 mm

Length

600 mm

Maximum penetration seal size - wall (W x H)

Building element

Plasterboard wall

Width

1400 mm

Height

2000 mm


Building element

Solid wall

Width

1400 mm

Height

2000 mm


Building element

Timber wall

Width

600 mm

Height

1000 mm


Building element

Sandwich panel wall

Width

1000 mm

Height

1000 mm

Penetration seal thickness

Building element

Plasterboard wall

Strength

≥ 120 mm


Building element

Solid wall

Strength

≥ 120 mm


Building element

Solid floor

Strength

≥ 150 mm


Building element

Timber wall

Strength

≥ 120 mm


Building element

Timber floor

Strength

≥ 150 mm


Building element

Sandwich panel wall

Strength

≥ 120 mm

Data line

Combustible pipe Ø

Diameter Ø

≤ 160 mm

Double solar pipes

Diameter DN

DN 40

Electrical installation conduits, bundled Ø

Bundle Ø

≤ 100 mm

Single Ø

≤ 32 mm

Cable Ø

≤ 21 mm

Electrical installation conduits, single Ø

Single Ø

≤ 63 mm

Cable Ø

≤ 21 mm

Coaxial cables / wave guides Ø

Diameter Ø

≤ 51.1 mm

Cable bundles Ø

Bundle Ø

≤ 100 mm

Single Ø

≤ 21 mm

Cable Ø

Diameter Ø

≤ 80 mm

General

Cable support system

yes

HVAC split line combinations

yes

Multilayer pipe

Diameter Ø

≤ 75 mm

Insulation

FEF


Diameter Ø

≤ 32 mm

Insulation

PEF


Diameter Ø

≤ 75 mm

Insulation

Mineral fibre

Non-combustible pipes Ø

Diameter Ø

≤ 108 mm

Insulation

FEF

Material/manufacturer

Copper


Diameter Ø

≤ 219.1 mm

Insulation

FEF

Material/manufacturer

Steel


Diameter Ø

≤ 108 mm

Insulation

Mineral fibre

Material/manufacturer

Copper


Diameter Ø

≤ 323.9 mm

Insulation

Mineral fibre

Material/manufacturer

Steel


Diameter Ø

≤ 88.9 mm

Insulation

PIR

Material/manufacturer

Copper


Diameter Ø

≤ 219.1 mm

Insulation

PIR

Material/manufacturer

Steel

speedpipes

Diameter Ø

≤ 50 mm

Required products

FLAMMOTECT-A - Coating, 12.5 kg

Article number

01155131

FLAMMOTECT-A - Coating, 5 kg

Article number

01155132

FLAMMOTECT-A - Solid emulsion 12.5 kg

Article number

01155136

FLAMMOTECT-A - Solid emulsion, 5kg

Article number

01155121

FLAMMOTECT-A - Filler, 12.5 kg

Article number

01155134

FLAMMOTECT-A - Filler, 5 kg

Article number

01155135

FLAMMOTECT-A - Filler, 310 ml

Article number

01155115

Mineralfaserplatte FLAMMOTECT-A - 60/1 - 1000 x 600 x 60 mm, coating 0.5 mm; single-sided

Article number

01181165

NBR-plus - NBR-plus fire protection fabric, roll, 10 metres, width 125 mm, pre-slotted (2 x 62.5 mm)

Article number

01261941

AWM II - Ø 32 mm, grey

Article number

01142032

AWM II - Ø 40 mm, grey

Article number

01142040

AWM II - Ø 50 mm, grey

Article number

01142050

AWM II - Ø 63 mm, grey

Article number

01142063

AWM II - Ø 75 mm, grey

Article number

01142075

AWM II - Ø 90 mm, grey

Article number

01142090

AWM II - Ø 110 mm, grey

Article number

01142110

AWM II - Ø 125 mm, grey

Article number

01142125

AWM II - Ø 140 mm, grey

Article number

01142140

AWM II - Ø 160 mm, grey

Article number

01142160

KSL-W - 10 000 x 50 x 1.5 mm, self-adhesive

Article number

15510

KSL-W - 20 000 x 50 x 1.5 mm, self-adhesive

Article number

15520

EC Endless Collar - Set (U/U) - consisting of fire protection wrap, metal tape, hooks, labels

Article number

01145303

Mineral wool - 10 kg bag

Article number

01183000

Lamella mat KLIMAROCK - Roll 610 x 50 cm = 3.05 m²

Article number

01187100

Do you have questions on System Flammotect 2 x 60 mm and other fire protection applications? Please contact us:

+49 4105 4090-0

Get in touch

How can we help?