System Flammotect 1 x 80 mm
Mixed penetration sealing system made of a layer of mineral fibre boards (1 x 80 mm) with ablative coating. Suitable for cables, cable bundles, and cable trays as well as empty electrical installation conduits and HVAC split lines. Fire-resistant up to max. 120 minutes.
Areas of application
Mixed penetration seal for cable and pipes used in:
- Plasterboard walls
- Solid walls
- Solid floors
Highlights
- 90 min fire resistance with only one layer of boards
- Approved for sealing electrical installation conduits and pre-insulated refrigerant lines
Fire resistance class
EI 90 (max. EI 120) acc. to EN 13501-2
Certificate
ETA-22/0052: 6/24/24
Features
- Variety of certificates for products used, e.g. resistance to moisture, freeze-thaw cycles, and UV radiation as well as various oils and chemicals
- The required dry film thicknesses can be applied in a single operation
- The consistency of the coating material enables the clean coating of cables and seal surfaces
- The coating remains flexible even after complete curing
- The fire protection coating can be coated over with other paints
Downloads
Application data sheets / Installation manuals / Certificates
Installation video: System Flammotect
The Flammotect system consists of a 60 mm or 80 mm thick mineral fibre board (single layer) or two 50 mm or two 60 mm thick boards (double layer) and is equipped with an ablative fire protection coating. It offers a wide range of applications for a wide variety of media lines with a broad spectrum of diameters and insulation types. The Flammotect system fulfils the requirements of fire resistance class up to EI 120 in accordance with EN 13501-2.
System information
Technical data
Thickness of building element
Building element
Plasterboard wall
Thickness of building element
≥ 100 mm
Building element
Solid wall
Thickness of building element
≥ 100 mm
Building element
Solid floor
Thickness of building element
≥ 150 mm
Maximum penetration seal size - floor (L x W)
Building element
Solid floor
Width
600 mm
Length
2000 mm
Building element
Solid floor
Width
infinite mm
Length
480 mm
Maximum penetration seal size - wall (W x H)
Building element
Plasterboard wall, solid wall
Width
600 mm
Height
2000 mm
Penetration seal thickness
Building element
Plasterboard wall, solid wall, solid floor
Strength
≥ 80 mm
Data line
Electrical installation conduits, bundled Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 25 mm
Cable Ø
≤ 21 mm
Electrical installation conduits, single Ø
Single Ø
≤ 63 mm
Cable Ø
≤ 21 mm
Cable bundles Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 21 mm
Cable Ø
Diameter Ø
≤ 80 mm
General
Cable support system
yes
HVAC split line combinations
yes
Conduits made of steel or plastic Ø
Diameter Ø
≤ 16 mm
speedpipes
Diameter Ø
≤ 50 mm
Required products
FLAMMOTECT-A - Coating, 12.5 kg
Article number
01155131
FLAMMOTECT-A - Coating, 5 kg
Article number
01155132
FLAMMOTECT-A - Solid emulsion 12.5 kg
Article number
01155136
FLAMMOTECT-A - Solid emulsion, 5kg
Article number
01155121
FLAMMOTECT-A - Filler, 12.5 kg
Article number
01155134
FLAMMOTECT-A - Filler, 5 kg
Article number
01155135
FLAMMOTECT-A - Filler, 310 ml
Article number
01155115
- 1000 x 600 x 80 mm, coating: 0.5 mm on both sides
Article number
01182185
NBR-plus - NBR-plus fire protection fabric, roll, 10 metres, width 125 mm, pre-slotted (2 x 62.5 mm)
Article number
01261941
Mineral wool - 10 kg bag
Article number
01183000
