Joint cord RP 55 I
Flexible fire protection cord made of mineral fibres for fire sealing structural joints. The fire protection joint cord is available in various diameters for joint widths of 10 mm to 55 mm.
Use: The mineral fibre sealing cord is suitable for expansion and movement joints with a fire resistance class of EI 30 – EI 120 in solid floors as well as in load-bearing and non-load-bearing solid separating walls. Additionally, it has also been tested for use in movement joints (shear joints up to a width of 55 mm) between solid building elements.
Areas of application
- Suitable for fire protection joints between building elements with similar loads
- Can be used in staged joints and linear butt joints with or without shear stress
- Fire sealing of structural joints between solid building elements
- Sealing of joint widths ≥ 10 to ≤ 55 mm
Highlights
- Low material usage and work effort
- Only one layer of cord required up to EI 90
- Only two layers of cord up to EI 90 for shear joints
- Permitted for unloaded and loaded solid walls
- No additional seals required for fire sealing
Features
- Sealing cord made of non-combustible mineral fibre
- Fire protection joint seal for joint widths up to 55 mm in walls and floors
Product information
Technical data
General
Scope of application
For sealing horizontal or vertical linear joints with a width of up to 55 mm in the connecting area between fire-resistant walls and floors inside buildings and structures
Building material certificate
ETA-22/0845
Brand name
FLAMRO
Area of application
Solid wall, floor. Suitable for expansion joints between components with similar loads and deformation. Suitable for joints between components subject to shear loading, which can be designed as stepped joints (multi-stage joints) and as linear butt joints (single-stage joints).
Colour
Anthracite
Short description of the article
Joint filling cord for joints with and without movement requirements
Storage
Dry
Delivery form
Roll
Product name
Joint cord
Processing instructions
In floors the (lower) joint filling rope must be set back by at least 25 mm during installation. In walls the two outer joint layers must be set back by at least 25 mm when more than one joint filling rope is used.
Delivery and packaging
General
Delivery form
Roll
Joint filling rope RP 55 I / 12 - Joint filling rope Ø 12 mm, intended for joint widths ≤ 10 mm
Article number
01186012
Color
Anthracite
Joint filling rope RP 55 I / 15 - Joint filling rope Ø 15 mm, intended for joint widths ≤ 12 mm
Article number
01186015
Color
Anthracite
Joint filling rope RP 55 I / 20 - Joint filling rope Ø 20 mm, intended for joint widths ≤ 17 mm
Article number
01186020
Color
Anthracite
Joint filling rope RP 55 I / 30 - Joint filling rope Ø 30 mm, intended for joint widths ≤ 27 mm
Article number
01186030
Color
Anthracite
Joint filling rope RP 55 I / 40 - Joint filling rope Ø 40 mm, intended for joint widths ≤ 37 mm
Article number
01186040
Color
Anthracite
Joint filling rope RP 55 I / 50 - Joint filling rope Ø 50 mm, intended for joint widths ≤ 47 mm
Article number
01186050
Color
Anthracite
Joint filling rope RP 55 I / 60 - Joint filling rope Ø 60 mm, intended for joint widths ≤ 55 mm
Article number
01186060
Color
Anthracite
