BIOFERM A fire protection acrylate
BIOFERM A is a fire protection acrylate that is free of halogen, solvents, isocyanate, and silicone.
Use: The fire protection acrylate is suitable for the flexible sealing of structural joints with moderate tensile stress and without constant exposure to moisture.
Areas of application
BIOFERM A fire protection acrylate is suitable for indoor and outdoor use, e.g. between concrete, masonry, plaster surfaces, fibre cement, plasterboard, untreated and anodised aluminium, wood, or rigid PVC. The fire protection acrylate is used for:
- Sealing structural joints
- Sealing connections
- Bonding expanded polystyrene to absorbent substrates
Highlights
- Can be coated over
- Resistant to ageing
- Weather-resistant
Features
- Odourless
- Compatible with coatings (DIN 52452-4)
- Excellent storage stability
- Good UV resistance
- Water-dilutable
Downloads
Technical data sheets / Safety data sheets / Declaration of performance
Product information
Technical data
General
Brand name
FLAMRO Brandschutz Vertriebs GmbH
Movement absorption
7.5 %
Area of application
Versatile fire protection sealing system for joints in indoor and outdoor areas, for sealing connections and joints moderately subject to movement and without constant exposure to moisture.
Durability
Can be stored unopened for at least 18 months if stored properly.
Skin formation (23 °C / 50% relative humidity)
approx. 10 min.
Short description of the article
Halogen, solvent, isocyanate and silicone-free fire protection acrylate. Can be coated over, resistant to aging and weathering.
Storage
Protect from frost! Store in a cool and dry place (+5 °C – +30 °C).
Penetration (DIN 51579, 5 sec)
ca. 210 ± 30 1/10 mm
Product name
Sealant
Shore-A hardness
15 ± 5 units
Safety instructions
For further safety instructions, please read the safety data sheet.
Stability (DIN EN ISO 7390)
≤ 2 mm
Temperature load (withstands temperatures of:)
-25 - 80
Processing instructions
The adhesive surfaces must be dry, load-bearing and free of dust and grease. For optimum adhesion to the surface, pre-treat with diluted sealing compound.
Processing temperature
+5 °C to +40 °C
Consumption
With a cartridge at joint dimensions of: 5 x 5 mm - approx. 12 metres 10 x 10 mm - approx. 3 metres
Bond strength
With a cartridge at joint dimensions of: 5 x 5 mm - approx. 12 metres 10 x 10 mm - approx. 3 metres
Bulk density
ca. 1,55 ± 0,05 g/cm³
Mass loss (ISO 10563)
Mass loss
15 %
Comparison symbols
%
Delivery and packaging
BIOFERM A - Fire protection acrylate
Article number
01156011
Color
Light grey
Type of packaging
Cartridge