A rolled up Flamro fire protection cord for fire sealing structural joints.
Mineral fibre products

Joint cord RP 55 I

Flexible fire protection cord made of mineral fibres for fire sealing structural joints. The fire protection joint cord is available in various diameters for joint widths of 10 mm to 55 mm.

Use: The mineral fibre sealing cord is suitable for expansion and movement joints with a fire resistance class of EI 30 – EI 120 in solid floors as well as in load-bearing and non-load-bearing solid separating walls. Additionally, it has also been tested for use in movement joints (shear joints up to a width of 55 mm) between solid building elements.

Areas of application

  • Suitable for fire protection joints between building elements with similar loads
  • Can be used in staged joints and linear butt joints with or without shear stress
  • Fire sealing of structural joints between solid building elements
  • Sealing of joint widths ≥ 10 to ≤ 55 mm

Highlights

  • Low material usage and work effort
  • Only one layer of cord required up to EI 90
  • Only two layers of cord up to EI 90 for shear joints
  • Permitted for unloaded and loaded solid walls
  • No additional seals required for fire sealing

Features

  • Sealing cord made of non-combustible mineral fibre
  • Fire protection joint seal for joint widths up to 55 mm in walls and floors 

Downloads

Technical data sheets / Safety data sheets / Declaration of performance

Joint cord RP 55 I

Product information

Technical data

General

Scope of application

For sealing horizontal or vertical linear joints with a width of up to 55 mm in the connecting area between fire-resistant walls and floors inside buildings and structures

Building material certificate

ETA-22/0845

Area of application

Solid wall, floor. Suitable for expansion joints between components with similar loads and deformation. Suitable for joints between components subject to shear loading, which can be designed as stepped joints (multi-stage joints) and as linear butt joints (single-stage joints).

Colour

Anthracite

Short description of the article

Joint filling cord for joints with and without movement requirements

Storage

Dry

Delivery form

Roll

Product name

Joint cord

Processing instructions

In floors the (lower) joint filling rope must be set back by at least 25 mm during installation. In walls the two outer joint layers must be set back by at least 25 mm when more than one joint filling rope is used.

Delivery and packaging

General

Delivery form

Roll

Fugenschnur RP 55 I / 12 - Joint filling rope Ø 12 mm, intended for joint widths ≤ 10 mm

Article number

01186012

Color

Anthracite

Fugenschnur RP 55 I / 15 - Joint filling rope Ø 15 mm, intended for joint widths ≤ 12 mm

Article number

01186015

Color

Anthracite

Fugenschnur RP 55 I / 20 - Joint filling rope Ø 20 mm, intended for joint widths ≤ 17 mm

Article number

01186020

Color

Anthracite

Fugenschnur RP 55 I / 30 - Joint filling rope Ø 30 mm, intended for joint widths ≤ 27 mm

Article number

01186030

Color

Anthracite

Fugenschnur RP 55 I / 40 - Joint filling rope Ø 40 mm, intended for joint widths ≤ 37 mm

Article number

01186040

Color

Anthracite

Fugenschnur RP 55 I / 50 - Joint filling rope Ø 50 mm, intended for joint widths ≤ 47 mm

Article number

01186050

Color

Anthracite

Fugenschnur RP 55 I / 60 - Joint filling rope Ø 60 mm, intended for joint widths ≤ 55 mm

Article number

01186060

Color

Anthracite

Do you have questions on Joint cord and other fire protection products? Please contact us: