System Flammotect OSI
Mixed penetration seal made of mineral fibre boards with ablative coating. The mineral fibre board seal is particularly suitable for structural conditions that require one-sided installation. Fire-resistant up to max. 120 minutes.
Areas of application
Secure penetration sealing system for a variety of cables and pipes in:
- Plasterboard walls
- Solid walls
- Solid floors
- Shaft walls
Highlights
- One-sided installation and retrofitting
- Only one board in the area of the opening
- No need to construct a circumferential frame
- No screw connection to the building element required
Fire resistance class
Max. EI 120 acc. to EN 13501-2
Certificate
ETA-22/0052: 6/24/24
Features
- Variety of certificates for products used, e.g. resistance to moisture, freeze-thaw cycles, and UV radiation as well as various oils and chemicals
- The required dry film thicknesses can be applied in a single operation
- The consistency of the coating material enables the clean coating of cables and seal surfaces
- The coating remains flexible even after complete curing
- The fire protection coating can be coated over with other paints
Downloads
Application data sheets / Installation manuals / Certificates
System information
Technical data
General
Brand Name
FLAMRO Brandschutz Vertriebs GmbH
Thickness of building element
Component
Plasterboard wall
Thickness of building element
≥ 100 mm
Component
Solid wall
Thickness of building element
≥ 100 mm
Component
Shaft wall
Thickness of building element
≥ 40 mm
Maximum penetration seal size - floor (L x W)
Component
Solid floor
Width
1100 mm
Length
1300 mm
Maximum penetration seal size - wall (W x H)
Component
Plasterboard wall
Width
800 mm
Height
1175 mm
Component
Solid wall
Width
800 mm
Height
1175 mm
Component
Shaft wall
Width
370 mm
Height
450 mm
Penetration seal thickness
Thickness
≥ 100 mm
Data line
Combustible pipe Ø
Diameter Ø
≤ 160 mm
Electrical installation conduits, bundled Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 32 mm
Cable Ø
≤ 21 mm
Electrical installation conduits, single Ø
Single Ø
≤ 32 mm
Cable Ø
≤ 21 mm
Cable bundles Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 21 mm
Cable Ø
Diameter Ø
≤ 80 mm
General
Cable support system
yes
HVAC split line combinations
yes
Multilayer pipe
Diameter Ø
≤ 63 mm
Insulation
FEF
Diameter Ø
≤ 63 mm
Insulation
Mineral fibre
Non-combustible pipes Ø
Diameter Ø
≤ 88.9 mm
Insulation
Mineral fibre
Material / Manufacturer
Copper
Diameter Ø
≤ 170 mm
Insulation
Mineral fibre
Material / Manufacturer
Steel
Diameter Ø
≤ 88.9 mm
Insulation
FEF
Material / Manufacturer
Copper
speedpipes
Diameter Ø
≤ 7 mm
Quantity
≤ 24
Diameter Ø
≤ 10 mm
Quantity
≤ 7
Diameter Ø
≤ 12 mm
Quantity
≤ 5
Required products
FLAMMOTECT-A - Coating, 12.5 kg
Article number
01155131
FLAMMOTECT-A - Coating, 5 kg
Article number
01155132
FLAMMOTECT-A - Solid emulsion 12.5 kg
Article number
01155136
FLAMMOTECT-A - Solid emulsion, 5kg
Article number
01155121
FLAMMOTECT-A - Filler, 12.5 kg
Article number
01155134
FLAMMOTECT-A - Filler, 5 kg
Article number
01155135
FLAMMOTECT-A - Filler, 310 ml
Article number
01155115
Mineral fibre board FLAMMOTECT-A - 50/0.5/1 - 1000 x 600 x 50 mm, coating 0.5 mm single-sided pre-coated
Article number
01181155
DG-CR 1.5 - DG-CR 1.5 fire protection wrap, 2.5 m, width 125 mm, anthracite
Article number
01261930
DG-CR BS - 10 m, width 100 mm
Article number
01264931
Mineral wool - 10 kg bag
Article number
01183000
Lamella mat KLIMAROCK - Roll 610 x 50 cm = 3.05 m²
Article number
01187100
