DG-SC
DG-SC fire protection putty is suitable for universal use. Under thermal influence, the filler becomes intumescent and forms a solid, heat-insulating foam body.
Use: The fire protection putty is used for sealing electrical installations and pipelines. The putty can also be used as an annular gap seal around single-cable and single-pipe ducts.
Areas of application
DG-SC fire protection putty is used in plasterboard walls, solid walls, and solid floors. It is suitable as a fire retardant filler for:
- Sealing cables
- Sealing pipelines
Highlights
- Resistant to moisture, weathering, and UV radiation
- Suitable as an annular gap seal around single-cable and single-pipe ducts according to (M)LAR (German guidelines on pipe installations)
Used for system
ETA Standard:
System DG-SCFeatures
- Has no effect on other building materials such as polyethylene (PE) and polyvinyl chloride (PVC) in accordance with EOTA TR 024
- Can be coated over with approved paints based on acrylic dispersion, alkyd resin, polyurethane acrylic, and epoxy resin in accordance with EOTA TR 024
- Flexible
Downloads
Technical data sheets / Safety data sheets / Declaration of performance
Product information
Technical data
General
Product category
Fire Protection Filler
Product description
Fire protection filler, which forms a solid, heat-insulating foam body under thermal influence
Fields of application
- For sealing electrical installations and pipes in plasterboard walls, solid walls and solid floors
- Closure of annular gap around single cables and single pipe penetrations in accordance with national guidelines (e.g. (M)LAR).
Brand name
Flamro Brandschutz-Systeme GmbH, Am Sportplatz 2, 56291 Leiningen
Resistance of processed product
Against contact with solvents and subsequently applied coatings. Against constant moisture.
Expansion pressure
1 – 1.9
Material / Colour
Anthracite
Density (+20 °C)
1300 ± 10%
Viscosity
Paste-like
Shelf life
Can be stored unopened for at least 18 months if stored properly.
Storage
Protect from frost! Store in a cool and dry place (+5 °C – +25 °C).
Application temperature
+5 °C – +25 °C
Foam factor
15 - 26.5
Safety notes
For further safety instructions, please read the safety data sheet.
Processing information
Apply with spatula. Surfaces must be dry and free of fat and grease.
Delivery and packaging
DG-SC - Filler, 310 ml cartridge
Article number
01157000
Type of packaging
Cartridge/Foil sausage
Color
Anthracite
