NUCLASIT 2.4
Mortar for sealing fire-resistant penetration seals with simultaneous protection against ionising radiation. One-component, hydraulically curing, and resistant to ageing. Free of fibres, phenol, and halogen-containing plasticisers.
Use: Use in nuclear installations, reprocessing plants, and facilities with radiation protection requirements according to the German Radiation Protection Ordinance (StrlSchV) and the German X-ray Ordinance (RöV).
Areas of application
NUCLASIT 2.4 mortar is used as a sealing material for:
- Cable penetration seals
- Pipe penetration seals
- Mixed penetration seals
Highlights
- Tested and approved in accordance with national and international standards such as: DIN V 18580 and DIN EN 998-2
Features
- One-component
- Hydraulically curing
- Suitable for pumping, pressing, and manual installation
- Free of fibres, phenol, and halogen-containing plasticisers
- Resistant to ageing
Downloads
Technical data sheets / Safety data sheets / Declaration of performance
Product information
Technical data
General
Product category
Radiation protection mortar
Product description
One-component, hydraulically curing and ageing-resistant, suitable for pumping, pressing and for manual installation, free of fibres, phenol and halogen softeners.
Fields of application
- Use in nuclear installations, reprocessing plants, and facilities with radiation protection requirements according to the German Radiation Protection Ordinance (StrlSchV) and the German X-ray Ordinance (RöV).
- Used as closure material for cable, pipe and mixed penetration seals.
Radiology
No radiation-induced damage of a serious nature after radiation exposure. level 3 and level 4 was detected during the irradiation test. Pre-exposure to gamma rays.
Brand name
Flamro
Material / Colour
Grey
Dry bulk density
2,50 – 2,90
Bond strength
0,5 – 0,8
Joint compressive strength
3 – 4
Application temperature
> +5
Final strength
after approx. 28 days
Attenuation measurement
Weakness measurements carried out on insulation boards made of mineral mortar NUCLASIT 2.4 (boards 55 × 55 × 5 cm). The shielding effect of the insulation boards is similar to barite concrete with a density of 3.5 g/cm³.
Processing information
Surfaces must be solid, free of adhesion-reducing substances and dust. Absorbent surfaces should be pre-wet with water. The consistency of the mortar must be adapted to fill all necessary building elements without cavities.
Consumption
~ 3 l water + 30 kg dry mortar ≈ 11 l ready-to-use wet mortar ≈ 11 l volume after hardening
Storage
Cool and dry
Delivery and packaging
NUCLASIT 2.4 - 30 kg bag
Article number
01165000
Type of packaging
Bag
Color
Grey
