System Flammotect 4 x 60 mm
Penetration sealing system made of four mineral fibre boards (4 x 60 mm) with ablative coating for cables and cable bundles. Fire-resistant up to max. 240 minutes.
Areas of application
Penetration sealing system for electrical lines (cables & cable bundles) of all types in:
- Plasterboard walls
- Solid walls
- Solid floors
Highlights
- Meets particularly high fire resistance requirements: the four-layer penetration sealing system of rock wool boards with ablative fire protection coating for electrical installations prevents the spread of flames and excessive temperature rises for a duration of four hours
Fire resistance class
EI 240 acc. to EN 13501-2
Certificate
ETA-22/0052: 6/24/24
Features
- Variety of certificates for products used, e.g. resistance to moisture, freeze-thaw cycles, and UV radiation as well as various oils and chemicals
- The required dry film thicknesses can be applied in a single operation
- The consistency of the coating material enables the clean coating of cables and seal surfaces
- The coating remains flexible even after complete curing
- The fire protection coating can be coated over with other paints
Downloads
Application data sheets / Installation manuals / Certificates
System information
Technical data
General
Brand Name
FLAMRO Brandschutz Vertriebs GmbH
Thickness of building element
Component
Solid wall
Thickness of building element
≥ 240 mm
Component
Solid floor
Thickness of building element
≥ 200 mm
Maximum penetration seal size - floor (L x W)
Component
Solid floor
Width
infinite mm
Length
600 mm
Maximum penetration seal size - wall (W x H)
Component
Solid wall
Width
600 mm
Height
600 mm
Penetration seal thickness
Thickness
≥ 240 mm
Data line
Cable bundles Ø
Bundle Ø
≤ 100 mm
Single Ø
≤ 21 mm
Cable Ø
Diameter Ø
≤ 80 mm
General
Cable support system
yes
Non-combustible pipes Ø
Diameter Ø
≤ 323.9 mm
Insulation
Mineral fibre
Material / Manufacturer
Steel
Required products
FLAMMOTECT-A - Coating, 12.5 kg
Article number
01155131
FLAMMOTECT-A - Coating, 5 kg
Article number
01155132
FLAMMOTECT-A - Solid emulsion 12.5 kg
Article number
01155136
FLAMMOTECT-A - Solid emulsion, 5kg
Article number
01155121
FLAMMOTECT-A - Filler, 12.5 kg
Article number
01155134
FLAMMOTECT-A - Filler, 5 kg
Article number
01155135
FLAMMOTECT-A - Filler, 310 ml
Article number
01155115
FLAMMOTECT-A -
Article number
01155153
Mineral fibre board FLAMMOTECT-A - 60/0.5/1 - 1000 x 600 x 60 mm, coating 0.5 mm single-sided pre-coated
Article number
01181165
DG-CR 0.7 - Protection wrap, roll 20 m
Article number
01260231
DG-CR 1.5 - DG-CR 1.5 fire protection wrap, 2.5 m, width 125 mm, anthracite
Article number
01261930
DG-CR 1.5 - DG-CR 1.5 fire protection wrap, 10 m, width 125 mm, anthracite
Article number
01261931
Mineral wool - 10 kg bag
Article number
01183000
Lamella mat KLIMAROCK - Roll 610 x 50 cm = 3.05 m²
Article number
01187100
Identification Label, Europe -
Article number
14003
