Skip to main content

Fire protection systems for cable penetration seals

Cable penetration seals are important construction products for establishing preventive structural fire protection in buildings. They ensure that openings in walls or floors for feeding through electrical, data, coaxial, and glass fibre cables as well as cable support constructions and electrical installation conduits can be sealed so that the fire resistance of the building element is restored.

Flamro offers you approved penetration sealing systems for cable systems as well as pipe and mixed penetration sealing systems, cable ducts, and other fire protection products.

FLAMRO® firestop sealing systems for cable penetrations

The Novasit BM mortar penetration sealing system is installed around various cables and pipes in a wall duct.

System Novasit BM

Mortar penetration seal

The System Novasit BM 240 firestop mortar sealing system seals various cable penetrations in a wall.

System Novasit BM 240

Mortar penetration seal

System Flammotect 1 x 60 mm mineral fibre board seal installed around pipe and cable penetrations in a wall cross-section.

System Flammotect 1 x 60 mm

Mixed penetration sealing systems

System Flammotect 1 x 80 mm mixed penetration seal made of a mineral fibre board installed around pipes and cables in a construction wall.

System Flammotect 1 x 80 mm

Mixed penetration sealing systems

System Flammotect 2 x 50 mm mixed penetration sealing system seals cable and pipe penetrations in a wall segment.

System Flammotect 2 x 50 mm

Mixed penetration sealing systems

System Flammotect 2 x 60 mm mineral fibre board sealing system installed around various pipelines and cables in a wall profile.

System Flammotect 2 x 60 mm

Mixed penetration sealing systems

System Flammotect 4 x 60 mm mixed penetration sealing system installed for the fire sealing of various cable and pipe penetrations.

System Flammotect 4 x 60 mm

Cable sealing system

System Flammotect OSI installed around cables and pipes in a wall opening.

System Flammotect OSI

Mixed penetration sealing systems

The Flammotect Easy Seal system is used to seal off cables in a wall cross-section.

System Flammotect Easy Seal

Cable sealing system

System DG-SC cable firestop seal installed around cable penetrations in an example section of wall with fire protection filler.

System DG-SC

Cable sealing system

The separable pipe shells of the System Cable Tube surround various electrical lines in an example section of wall.

System Cable Tube

Cable tube sealing system

The pipe half-shells of the System Cable Tube ML secure various cables underneath raised floors.

System Cable Tube ML

Cable tube sealing system

Several fire protection pillows of the System BK-N laid on top of each other seal a cable tray with various electrical cables in a wall penetration.

System BK-N

Pillow sealing system

C-AJ-4108

Through Penetration

W-L-4095

Through Penetration

W-L-3443

Through Penetration

W-J-8063

Through Penetration

Fire insulation for cable openings

Electrical, IT, and telecommunications lines are indispensable for the usage of buildings. To supply the different areas of a building, openings in walls and floors must be planned for. Without cable penetration seals as fire protection measures that close off these openings, fire and smoke would be able to spread unimpeded throughout the entire building in the event of a fire. FLAMRO® penetration sealing systems are suitable fire protection solutions for cables of all types, cable trays, racks, and ladders as well as electrical installation conduits.

Why cable penetration seals from Flamro?

As safety products, fire protection systems for cable penetrations are subject to building authority regulations. Their function must be verified in fire tests. They may only be installed in buildings in the relevant country if all requirements are met.

All Flamro cable penetration seals (e.g. soft penetration seals or mortar seals) comply with the requirements of building authorities and, in some cases, have proven themselves for decades. They are continuously further developed and aligned with new developments in the fields of technical building equipment and construction technology.

Do you have questions on penetration sealing systems for cables and cable lines? Please contact us.

Telephone receiver as telephone icon to call Flamro's hotline.

+65 9177 8402

Envelope as e-mail icon to go to the contact form.

Get in touch

How can we help?

Welcome to Flamro

Would you like to visit Flamro Europe?